Back to Top
Back to Top
Back to Top

   
Wells Johnson Company was the first to bring an extensive line of products for infusion to the medical market place. Wells Johnson offers a number of systems to suit individual needs.

Single and Dual Head Infusion Systems

Wells Johnson has been at the forefront of the development and implementation of high quality infusion equipment since 1983.

The Wells Johnson Infusion Pump is the premiere high-powered, efficient peristaltic pump for virtually effortless infiltration.

The peristaltic pump used by more physicians than any other on the market today.

System includes:
• 2 Infusion Cannulas
 
 (20-1218-00 1 each)
   2.7mm x 27cm & 2mm x 17cm)

• 2 Luer Lock Handles
• Infusion Tubing (case of 5)
• Pneumatic Foot Switch
• Custom IV Stand
• Spinal Needle
• Training DVD

Also available:
• Infusion Pump 220 volt
• Dual Pneumatic Foot Switch
• Dual Pump Head


INFUSION SYSTEM
20-6000-00 (110V)
20-6005-00 (220V)
Variable flow rate from O to 850 mI/mim

Click to Enlarge

Click here to download the
Infusion Pump manual

DUAL PUMP HEAD
Added feature for simultaneous infusion in two different areas with virtually the same power.
Part No. 20-6020-00 (110V)
Part No. 20-6022-00 (220V)

PNEUMATIC FOOT SWITCH
For safe, air powered on/off control
20-6010-01

 


INFUSION CANNULAS
A critical element in the infusion technique. Available in single or multi-hole versions. Standard diameters are 1.6mm, 2.0mm, and 3.0mm. Standard lengths are 17cm, 25cm, and 32cm.

MULTI-HOLE INFUSION CANNULA
20-1218-00
(specify size)


3-HOLE SPATULA
INFUSION CANNULA
Ideal for facial procedures
20-1223-00
(specify sie)

 

PRESSURE CUFF
Most cost-effective way to infuse. Easy
system, ideal for small procedures.
SPECIFICATIONS
0-245ml/min., constant pressure of 200psi
Part No. 20-6050-00

Click to Enlarge

INFILTRATION TUBING  

“Y” INFILTRATION TUBING
With silicone sleeve, 1 70”
length, dual bag spikes
for non-stop infiltration.
24-6009-00 (Case of 10)
LARGE BORE
For more rapid infiltration,
w/silicone sleeve,1 88” length.
24-6028-00 (Case of 10)
LARGE BORE “Y” CONNECTOR
For more rapid infiltration.
Dual bag spikes for non-stop
infiltration. Includes silicone
sleeve,1 70” length.
24-6029-00 Case of 10)
LARGE BORE
For manual and pressure cuff.
Without sleeve,1 20” length.
24-6022-00 (Case of 10)

LARGE BORE “Y” CONNECTOR
Dual spike, for manual and
pressure cuff systems. Without
silicone sleeve,1 20” length.
24-6023-00 (Case of 10)

PERCUTANEOUS INFILTRATOR
Individual package, disposable.
24-4046-00 (Case of 10)


Infusion Cannulas / Handles

 

Infusion Pump Specifications

Weight -11 lbs.
Dimension -7” x 11” x 5”
Power -100 to 130 Vac, 60Hz
Drive -single direction
Motor -0 to 600 rpm
Maximum Vacuum -24” HG

Maximum Head Pressure
Continuous 25 psi
Intermittent 40 psi

PERISTALTIC PUMP
Maximum Flow rate 0—850 ml/min

PARTS & ACCESSORIES
Infusion Pump (110V) 20-6000-00
Infusion Pump Dual Head (110V) 20-6020-00
Infusion Pump (220V) 20-6005-00
Infusion Pump Dual Head (220V) 20-6022-00
Infusion Tubing, sterile, disposable 24-6001-00
Infusion Needles (specify size) 20-1060-00
Spinal Needles, sterile, disposable
18g x 6” 24-6002-00
25g x 3” 24-6003-00
20g x 3-1/2” 24-6004-00
Infusion Pumphead, single 18-4102-00
Pneumatic Foot Switch 20-6010-01
Luer Lock Infusion Handles 20-6004-98
Custom IV Stand 18-4200-0 1
User’s Manual 20-5078-00
 

WELLS JOHNSON COMPANY
"Your source for innovation and new technology."
8000 South Kolb Road,
Tucson, Arizona 85756-9104, USA
520-298-6069
1-800-528-1597
Fax 520-885-1189